Offering finely tuned trail protection, this trail and enduro mountain bike helmet gives exceptional coverage and features POC's innovative, patent-pending technology to minimize neck injury. Built to ride, all day. Features: - SPIN technology (Shearing Pad INside)—our patent-pending silicone-pad-technology system - Fully wrapped unibody shell to enhance durability and structural integrity - 360° size-adjustment system for the most precise and secure fit - Breakaway visor - Lightweight and well-ventilated Breakaway visor - The novel breakaway visor will snap off the helmet in an impact, thereby minimizing the impact forces that are transmitted to the neck. - The lightweight, well-ventilated Axion SPIN has extended protection zones around the temples and the back of the head for extra coverage where it is most needed.
The well-ventilated Tectal has been specifically developed for aggressive trail riding and enduro racing and incorporates the aramid bridges system from POC’s proven and award-winning Trabec helmet. The reinforced EPS liner provides a high level of protection and the unibody shell construction, introduced in POC’s ground breaking Octal road cycling helmet, further enhances the safety properties and construction integrity of the helmet while maintaining a low weight. Tectal offers more coverage than conventional mountain bike helmets and has a highly efficient ventilation design, optimized and evaluated through wind tunnel testing. The lightweight size adjustment system ensures a comfortable and secure fit. - EPS liner - Outer PC shell - Unibody shell construction - Aramid fiber grid for protection and durability - Designed to provide more coverage at temples and back of head - Size adjustment system - Adjustable visor - Recco reflector - Weight: XS-S: 320g, M-L: 350g, XL-XXL: 370g
$220.00 - $250.00
The Disciple MIPS is built around the ASTM-1952 DH Standard to meet the demands of freeride, downhill and enduro. It has a fiberglass shell, plush interior padding, and vented brow ports for comfort. Vinyl nitrile padding along the jaw line contributes to impact management in this critical area, and the integrated, breakaway P.O.V. camera mount plus built-in speaker pockets let you dial in your sound and images. It is equipped with the MIPS system to redirect impact energy, which can provide more protection in certain impacts. Altogether it’s an impressive option for a new era of riding.
The Session helmet is designed for trail riders that demand the balance of style, protection and ventilation. Koroyd is featured in strategic, zonal impact areas giving riders the confidence they need to charge harder. The top of the helmet has massive airports which combine with internal air channels to allow for maximum airflow and ventilation. The Session features channels on the front of the helmet for easy eyewear storage, and the three-position visor rotates high to allow for goggle storage. - Lightweight Aerocore in-mold construction - Zonal ventilated protection featuring patented Koroyd material - Integrated skeletal structure - VaporFit adjustable fit system - 15 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Ultimate sunglass and goggle integration - Camera and light mount compatible - Three-position adjustable visor - Weight (Size M) 13.05oz / 370 grams - Certification: CPSC, CE EN 1078 Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm
$250.00 - $270.00
The Giro Switchblade MIPS is an ASTM downhill-certified full-face helmet with a removable chinbar. Everything about the Switchblade is optimized for the descent, and that’s why it’s certified to CPSC, EN-1078 and ASTM-1952-DH with and without the chinbar. The chinbar is easy to remove—just push the buttons under the chinbar, rotate up, and remove—and it’s just as easy to reinstall. The Switchblade MIPS features the Roc Loc Air DH fit system, which has a bumper around the dial to prevent accidental adjustments if your helmet contacts your backpack or neck brace—all while keeping you cool. When the chinbar comes off, Wind Tunnel cheek pad ventilation adds even more cooling power as you start to climb. Plus, the full-cut style gives this helmet an aggressive look and provides ASTM-certified coverage even when the chinbar is removed. When your ride is all about descending, your helmet should be too, and the Switchblade MIPS is the only removable chinbar helmet that is truly built for the down.
The Radix MIPS helmet combines rugged style and durability to meet the demands of core trail riders, with the coverage, lightweight, and ventilation riders need to ride comfortably and confidently, all day. The Radix MIPS helmet is for the rugged adventurer who appreciates a perfect fit, the sun staying out of their eyes, and plenty of ventilation. The highly adjustable Roc Loc 5.5 MIPS system allows you to customize fit and feel for enhanced stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The P.O.V. Visor offers 15 degrees of adjustment, and the tough polycarbonate outer shell is fused permanently to the EPS foam liner using our in-mold construction process, to enhance durability and ventilation without excess bulk. - Construction: Full-wrap in-mold polycarbonate shell with EPS liner - Sport: Cycling - Number of vents: 25 - Ventilation type: Wind tunnel vents with internal channeling - Fit system: Roc Loc 5.5 MIPS
Among the Manifest's extraordinary features is Spherical Technology, which utilizes a ball-and-socket design powered by MIPS, the market-leading brain protection system that helps to reduce rotational forces. Spherical Technology allows the outer liner to rotate around the inner liner during a crash and also eliminates contact with a hard-plastic slip-plane. In addition to leading head protection, the Manifest offers wide-open airflow thanks to the AURA reinforcing arch, which bolsters structural integrity while allowing air to flow into the massive Wind Tunnel vents. You'll also get a comfortable, secure fit with the easy fit and positioning adjustments built in to the Roc Loc Trail Air fit system and plush, antimicrobial XT2 padding for exceptional sweat absorption. - Spherical Technology’s Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. It also eliminates contact with hard plastic or slip-planes against the skin. - Dual-density foam liners designed to address high- and low-speed impacts for more comprehensive energy management. - Structural integrity is bolstered by the shatter-resistant and translucent AURA reinforcing arch that runs throughout the helmet. - Integrated eyewear grippers help secure sunglasses. - All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's MIPS-equipped helmets is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - This visor features an adjustment mechanism that lets you move the visor up and down in indexed steps. These steps include three riding positions plus a high position for goggle storage above your brow. The design allows you to easily adjust your visor with one hand while riding. - Pure silver is the secret ingredient that gives XT2 the power to provide natural, permanent anti-odor protection to keep your helmet feeling and smelling fresh. - The integrated rubber goggle gripper on the back of the helmet helps to ensure that goggles stay in place even when you’re getting rowdy on the trail. - The Roc Loc Trail Air Fit System offers micro-adjustable fit adjustment, enhanced ventilation, and durable design that resists abrasion, scratches, and UV rays.
An evolution of our award-winning Forefront helmet, the completely redesigned Forefront 2 is a full-coverage helmet ideal for all-mountain riders who demand superior protection, ventilation and eyewear integration. For added protection, Koroyd has been extended into the back of the helmet to now fully encompass the helmet. Internal air channels are combined with open intake and exhaust ports to maximize ventilation, while AirEvac channels promote airflow to prevent fogging of your eyewear. The Forefront 2 also features channels on the front and rear of the helmet for eyewear storage, and a three-position visor that rotates high to allow for goggle storage. - Lightweight Aerocore in-mold construction - Zonal ventilated protection featuring patented Koroyd material - Integrated skeletal structure - MIPS system available in all colors - VaporFit adjustable fit system - 20 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Three-position adjustable visor - Ultimate sunglass and goggle integration - Integrated accessory mount sold separately - Weight (Size M, MIPS) 13.4oz / 380 grams - Certification: CPSC, CE EN 1078 Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm
$112.50 - $225.00 $224.99 - $225.00 Up to 50% Off
When we set out to improve the original S-Works Prevail, we knew that we had our work cut out for us. How could we improve on the industry benchmark for fit, ventilation, and comfort? By listening to our riders—that’s how. Through this, we realized that there were a few aspects of the original Prevail that needed to be changed, with the biggest request being for a lower-sitting design. We thought to ourselves, 'thinking big shouldn't result in bigger helmets,' so with the Prevail II, we set out to prove that big ideas can come in smaller packages. It all starts with our patented EPS construction that relies on multi-density foam that's paired with a robotically woven, Aramid-reinforced skeleton. This comes with a reduction in the overall size, creating a smaller profile that fits lower down on the head for a better fit and safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake and exhaust are optimized for unparalleled cooling over the entire head. And in the Win Tunnel, we found these new designs amounted to six seconds saved over 40km when compared to a 'standard' road helmet. Another standout feature of the S-Works Prevail II is the Gutter Action System that manages the flow of sweat, keeping it away from your eyes and dripping it off of the pads over your temple. In the end, the S-Works Prevail II is the most complete lightweight race helmet we've ever made—perfect for hot, mountainous rides and flat, windy sections alike. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - Patented Aramid-Reinforced Skeleton provides internal EPS support. - Ultra-light Mindset II micro-dial fit system with height adjustability for the perfect fit. - Mega Mouthport optimizes cooling and sweat evaporation. - Aerodynamic design. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports. - Thin, soft, and lightweight 4X DryLite webbing won’t stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Gutter Action brow pad design for increased comfort and sweat management. - Reflective decals for increased visibility in low-light conditions. - Patented clip-on visor included.
The women's Radix MIPS helmet combines rugged style and durability to meet the demands of core trail riders, with the coverage, lightweight, and ventilation riders need to ride comfortably and confidently, all day. The Radix MIPS helmet is for the rugged adventurer who appreciates a perfect fit, the sun staying out of their eyes, and plenty of ventilation. The highly adjustable Roc Loc 5.5 MIPS system allows you to customize fit and feel for enhanced stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The P.O.V. Visor offers 15 degrees of adjustment, and the tough polycarbonate outer shell is fused permanently to the EPS foam liner using our in-mold construction process, to enhance durability and ventilation without excess bulk. - Construction: Full-wrap in-mold polycarbonate shell with EPS liner - Sport: Cycling - Number of vents: 25 - Ventilation type: Wind tunnel vents with internal channeling - Fit system: Roc Loc 5.5 MIPS
Page 1 of 1